-
Insulated/Sandwich Panel
0,6 mm thickness with anti-bacterial skin from bluescope steel, suitable for operating theatre, ICU, ICCU, and other clean rooms. The Sandwich Panel is easy to clean.
-
IPA Medical Gas Alarm
Medical Gas Alarm serves as a warning signal if the gas pressure in the pipeline decreases or is below the pre-set limit. The Medical Gas Alarm is usually placed in the nurse’s room or in the technician’s room to make it easier to monitor and take action if the alarm sounds. The Medical Gas Alarm is available with 1 gas, 2 gases, 3 gases, or 4 gases.
-
IPA Shut Off Valve
Shut Off Valve has a function to disconnect or connect the flow of medical gas in one area/room in the hospital. It is used during maintenance or when checking in one area, so the supply of medical gas in other areas is not interrupted.
-
Medical Gas Cylinder O2 6m3
Medical Gas Cylinders are used as permanent gas reservoirs. Commonly, these Medical Gas Cylinders are made of two types of materials, such as steel and aluminum. Steel cylinders have a gas storage capacity of 6m3, 2m3, 1.5m3, and 1m3, while aluminum cylinders have a gas storage capacity of 1.5m3 and 1m3. The working pressure is usually at 150 bar.
-
Medical Gases Twin Outlet
So called as Y-shaped probe, this Twin Outlet is applied when double outlets are required from a single outlet source.
The Twin Outlet could be used during an emergency that requires additional number of patient beds while the available wall outlets are not sufficient.
The available types of gases are:
- Oxygen
- Nitrous Oxide
- Air
- Medical Vacuum
Features:
These are connected to the gas outlet directly where same gas outlets are required. -
PRES BLOCK Connector AGSS 1 L
The connector is used to connect the AGSS outlet to the anesthesia machine’s hose. In this way, any residual or excess anaesthetic gas in the machine could be removed from the room.
Materials: Aluminium series 2000 or 6000 anodized
AISI
PA/POM
